This is a basic 1bbl carburetor based on a 276 CFM Impco 200 mixer and 1½" SAE 1bbl throttle body.  It can be installed on a 1bbl manifold 2-15/16" centre-to-centre carb flange bolts.  This carburetor kit is suitable for applications with engines nominally rated up to 172 hp.

You assemble this carburetor from the following components:

• 1 Impco 200M-1-2 Mixer, 2-5/8" Air Horn with Silicone diaphragm
• 1 Impco AT2-4-2 1BBL Throttle Body Assy., Standard, 38.1 mm (1.50") flange, 7.9 mm (0.31") shaft dia.
• 1 Gann 86EN Vapour Elbow, Nylon, 1" Hose x ¾" MNPT

To make an underhood conversion kit, you must add either the BCP-EE or the BCP-EV Basic Components kits.

The air horn on this carburetor is on the side of the mixer.  For an air filter, we recommend using a K&N PN RB-0810 or equivalent.

Propane carburetors are not oversized like gasoline carburetors.  This carburetor will properly meter fuel to a 225 CID (3.7L) engine up to 4987 RPM.  Above this RPM, the engine will simply gradually lose power.

This kit is NOT stocked and may take several weeks to arrive.