This is a basic 2bbl carburetor based on a 276 CFM Impco 200 mixer and 1¼" SAE 2bbl throttle body.  It can be installed on a 2bbl manifold 1-7/8" x 3¼" centre-to-centre carb flange bolts.  This carburetor kit is suitable for applications with engines nominally rated up to 172 hp.

You assemble this carburetor from the following components:

• 1 x Impco 200M-1-2 Mixer, 2-5/8" Air Horn with Silicone diaphragm
• 1 x Impco AB1-24-1, Throttle Body Assy, 2bbl, (No flange)
• 1 x Impco T2-11 Flange, 1-1/4" 2bbl
• 1 x Gann 86EN Vapour Elbow, Nylon, 1" Hose x ¾" MNPT

To make an underhood conversion kit, you must add either the BCP-EE or the BCP-EV Basic Components kits.

The air horn on this carburetor is on the side of the mixer.  For an air filter, we recommend using a K&N PN RB-0810 or equivalent.

Propane carburetors are not oversized like gasoline carburetors.  This carburetor will properly meter fuel to a 225 CID (3.7L) engine up to 4987 RPM.  Above this RPM, the engine will simply gradually lose power.

This kit is NOT stocked and may take several weeks to arrive.